<tr id="eq2u5"></tr>

              <code id="eq2u5"></code>

              1. 咨詢熱線: 13896006908

                Contact us 聯系我們

                重慶豐正機械有限公司

                聯系人:朱經理

                手機:13896006908

                電話:023-67188505

                傳真:023-67188506

                地址:重慶市渝北區回興工業園區蘭馨大道2號

                可調多軸器

                (中切削)U型方型可調多軸器

                (Medium cutting)Type U square shaft multi-spindle tool

                ◎方型可調式多軸器結構與圓型相同。工作孔距如屬直線或長方型萬向多軸器,以免移位量太大損害萬向節接頭壽命。使用方法與圓型相同。

                (盡量配合工作之孔距坐標,設計齒輪箱結構即定鏜孔位)

                ◎The structure of the square shaft multi-spindle tool is the same as the structure of the round shaft multi-spindle tool.This multi-spindle tool is suitable for the straight line or the rectangular working hole.When using,don't move too much to reduce the lifetime of the cardan joint,The usage is also the same as the round shaft one.

                (We will design the structure of gear case,that is,the position of the boring hole as much as possible according to the coordinate of per hole.)

                咨詢熱線:

                13896006908

                在線咨詢
                規格參數

                ※萬向節注意事項:

                1調整時不能超過規定的角度15度

                2如超過此極限心軸易磨損或斷裂

                3工作時應經常加潤滑油脂

                ※Note of cardan Joint

                1.Do not set the angle to more than the specifled l5 degrees.

                2.If the limit is exceeded,the shaft will be easy to wear or break.

                3.During work,lubrication should be added frequently.

                注:ER8和C5最小間距為13,ER11和C6最小間距為18,ER16和C9最小間距為26,ER20和C12最小間距為28

                SU100×165

                SU120×200

                SU120×300

                SU160×450

                SU220×360

                SU250×500

                SU170X200

                SU300X400

                SU400X550

                SU450X550

                SU150X800

                SU300X1000

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                ER8/5

                ERll/7

                ERl6/10

                ER20/13

                C5/5

                C6/6

                C9/9

                C12/12

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                1∶1

                1∶2

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                13

                18

                26

                28

                100×165

                120×200

                120×300

                160×450

                220×360

                250×500

                170×200

                300×400

                400×550

                450×550

                150×800

                300×1000

                2-8

                2-12

                4-16

                4-16

                6-14

                4-18

                2-12

                4-16

                4-18

                4-18

                4-18

                4-18

                掃一掃

                重慶豐正機械有限公司

                在線咨詢

                咨詢熱線:023-67188505

                QQ咨詢 QQ咨詢

                      <tr id="eq2u5"></tr>

                          <code id="eq2u5"></code>

                          1. 国内精品视频白在欧美一区